BETA TEST TIPS
Thank you for helping test CTRL Plugins. Released versions of MPC plugins are available directly through Open MPC Plugin Manager, but beta versions are not listed there. Betas are installed manually by copying the plugin's folder into VST2 Plugins on your MPC. This page covers everything you need to get a beta build onto your MPC, test it, and report what you find.
Before You Start
- Download the ZIP archive that matches your MPC:
- Gen 2: MPC Live III, MPC One G2, MPC Key G2, MPC XL, and Akai Force G2.
- Gen 1: MPC Live, Live II, One, X, Key 61, Key 37, and the Akai Force.
- Your MPC must be running MPC OS 3.10.1 or later with External Plugin Support turned on. If not, follow Set Up MPC OS 3.10.1 below first.
- Save any open project before putting your MPC into Controller Mode.
Set Up MPC OS 3.10.1
MPC OS 3.10.1 adds official support for third-party VST plugins, so rolling back to an older MPC OS is no longer needed. Third-party plugins stay hidden until External Plugin Support is turned on.
Turn On External Plugin Support
- Update your MPC to MPC OS 3.10.1 or later. You can check your version in Preferences on the Info tab.
- Go to Menu → Preferences → Enhancements.
- Check Enable Enhancements.
- A warning popup appears. Read it, then tap OK.
- Check External Plugin Support.
- Wait a few seconds so the setting is saved, then restart your MPC.
Install Plugin Manager
Plugin Manager is not needed to install beta plugins. It is used to install released CTRL Plugins and to move plugins installed on an earlier MPC OS. On MPC OS 3.10.1, Plugin Manager is installed by copying its folder into a VST2 Plugins folder. No USB prompt or SSH access is needed.
Download Plugin Manager
- Visit the Open MPC installation page.
- Under Which MPC do you have?, select your MPC model.
- Select your MPC OS version from the list.
- Download the Open MPC Plugin Manager ZIP archive.
- Extract the ZIP archive. It contains one folder named OpenMPC - VST - Plugin Manager.
Copy It to Your MPC
- Connect your MPC to your PC with a USB cable.
- Put your MPC into Controller Mode (Menu, then the computer icon in the top right).
- Open File Explorer and locate the MPC User drive. On Windows, it appears only after Akai's MPC USB driver is installed.
- If it does not already exist, create a folder named VST2 Plugins in the root directory of the MPC User drive. The name must match exactly.
- Copy the OpenMPC - VST - Plugin Manager folder into VST2 Plugins.
- Safely eject the MPC User drive from your computer.
- On your MPC, tap Standalone to return to Standalone Mode.
Alternatively, you can install Plugin Manager on a USB thumb drive or SD card:
- On your computer, create a folder named VST2 Plugins in the root directory of the drive.
- Copy the OpenMPC - VST - Plugin Manager folder into VST2 Plugins.
- Eject the drive and insert it into your MPC. Leave it inserted: Plugin Manager runs from that drive.
Open Plugin Manager
- Add a new plugin track.
- Choose External Plugins → OpenMPC → Plugin Manager.
Install a Beta Plugin
Beta plugins are installed by copying the plugin's folder into VST2 Plugins on your MPC.
Copy the Plugin to Your Device
- Download the ZIP archive that matches your MPC generation.
- Extract the ZIP archive. It contains one folder named after the plugin, for example CTRL - VST - CTRL Duck.
- Connect your MPC to your PC with a USB cable.
- Put your MPC into Controller Mode.
- Open File Explorer and locate the MPC User drive.
- If it does not already exist, create a folder named VST2 Plugins in the root directory of the MPC User drive. The name must match exactly.
- Copy the plugin's folder into VST2 Plugins. Copy the folder itself, not the files inside it.
- Safely eject the MPC User drive from your computer.
- On your MPC, tap Standalone to return to Standalone Mode.
The plugin is now listed under External Plugins → CTRL. No restart is needed.
Update a Beta Plugin
To install a newer beta version, delete the current version's folder from VST2 Plugins, then copy in the new one.
Replace the Plugin Folder
- Download the new beta ZIP archive that matches your MPC generation.
- Extract the ZIP archive. It contains one folder named after the plugin.
- Connect your MPC to your PC with a USB cable.
- Put your MPC into Controller Mode.
- Open File Explorer and locate the MPC User drive.
- Open the VST2 Plugins folder.
- Delete the old version's folder, for example CTRL - VST - CTRL Duck.
- Copy the new version's folder into VST2 Plugins. Copy the folder itself, not the files inside it.
- Safely eject the MPC User drive from your computer.
- On your MPC, tap Standalone to return to Standalone Mode.
No restart is needed. Your saved projects keep working with the new version.
Reporting Issues
When you send in results, please include the following:
- Plugin and version: The plugin you are testing and its version. The version can be found in the downloaded ZIP archive's name.
- Device: Your MPC model, and whether it is Gen 1 or Gen 2.
- Firmware: Your MPC OS version.
- Project setup: Roughly how many tracks and plugins are in use, and where the plugin is placed.
- Utility video (required): A short video of the plugin's UTILITY page, taken while the project plays, so the readings can be checked in action.
- Anything unexpected: Clicks, dropouts, controls that do not respond, or high CPU load. Where you can, include a short video showing the issue as it happens, with the sound audible.
Send your results using the form below. Share videos as an unlisted YouTube link.
Manual Uninstallation
Beta plugins are not installed with Plugin Manager, so they are uninstalled manually. You can also use these steps for any plugin that cannot be removed from within Plugin Manager.
MPC OS 3.10.1 or Later: Delete the Plugin Folder
On MPC OS 3.10.1, each plugin is a single folder inside VST2 Plugins, so removing that folder uninstalls it.
- Connect your MPC to your PC and put it into Controller Mode, or insert the USB thumb drive or SD card the plugin was installed to into your computer.
- Open File Explorer and locate the drive the plugin was installed to, such as the MPC User drive.
- Open the VST2 Plugins folder.
- Delete the plugin's folder, for example CTRL - VST - CTRL MixBus.
- If the plugin's ZIP archive is in a local-plugins folder from an earlier installation, delete it too.
- Safely eject the drive from your computer.
- On your MPC, tap Standalone to return to Standalone Mode.
Projects that used the plugin will still open, without the plugin.
On MPC OS 3.9.1 or earlier, use the uninstall script included in the plugin's ZIP archive instead:
MPC OS 3.9.1 or Earlier: Swap in the Uninstall Script
- Connect your MPC to your PC.
- Put your MPC into Controller Mode.
- Open File Explorer and locate the MPC User drive.
- Open the local-plugins folder.
- Using WinRAR, open the plugin's ZIP archive (for example, the CTRL MixBus ZIP archive).
- Locate install.sh and rename it to tempinstall.sh.
- Locate uninstall.sh and rename it to install.sh.
- Before disconnecting, safely eject any SD cards, USB flash drives, or external storage devices connected to your MPC.
- On your MPC, tap the Standalone button to return to Standalone Mode.
MPC OS 3.9.1 or Earlier: Run the Uninstaller
- Start an empty project.
- Add a new plugin and select Plugin Manager.
- Locate the plugin in the plugin list.
- Tap Install. Because of the renamed script, this runs the uninstaller.
- Tap Apply.
- Tap Restart & Apply.
- When the confirmation popup appears, tap Restart & Apply again.
Your MPC will restart to complete the process, and the plugin will be uninstalled.